-2
-2
XC-2.2
XC-2.1 XC-2.1 XC-2.2
XC-3.2
XC-3.1 XC-3.1 XC-3.2
XC-4.2
XC-4.1 XC-4.1 XC-4.2
XC-5.2
XC-5.1 XC-5.1 XC-5.2
XC-6.2
XC-6.1 XC-6.1 XC-6.2
XC-7.2
XC-7.1 XC-7.1 XC-7.2
XC-8.2
XC-8.1 XC-8.1 XC-8.2
-9.2
XC-9.1 XC-9.1 XC-9.2
XC-10.2
XC-10.1 XC-10.1 XC-10.2
XC-11.2
XC-11.1 XC-11.1 XC-11.2
XP-2.2 XP-2.1
XP-2.1
XP-2.2
XP-3.2 XP-3.1
XP-3.1
XP-3.2
XP-5.2 XP-5.1
XP-5.1
XP-5.2
XP-6.2
XP-
XP-6.1
XP-6.2
XP-
XP-
-10.1 XP-
Type
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resistivi, 1 A inductives.
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resistivi, 1 A inductives.
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resistivi, 1 A inductives.
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resistivi,1 A inductives.
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resistivi, 1 A inductives
Connection
Compressor indication
Alarm indication
Block indication
Season indication
Defrost indication
Terminal
XP-6.1/6.2
XP-7.1/7.2
XP-8.1/8.2
XP-9.1/9.2
XP-10.1/10.2
-2
-2
XC-2.2
XC-2.1 XC-2.1 XC-2.2
XC-3.2
XC-3.1 XC-3.1 XC-3.2
XC-4.2
XC-4.1 XC-4.1 XC-4.2
XC-5.2
XC-5.1 XC-5.1 XC-5.2
XC-6.2
XC-6.1 XC-6.1 XC-6.2
XC-7.2
XC-7.1 XC-7.1 XC-7.2
XC-8.2
XC-8.1 XC-8.1 XC-8.2
-9.2
XC-9.1 XC-9.1 XC-9.2
-10.2
XC-10.1 XC-10.1 XC-10.2
XC-11.1 XC-11.1 XC-11.2
XP-2.2 XP-2.1
XP-2.1
XP-2.2
XP-3.2 XP-3.1
XP-3.1
XP-3.2
XP-5.2 XP-5.1
XP-5.1
XP-5.2
Chillers and Inverter Air/Water heat pumps with axial fan
For further information on the control logics, please refer to the relative manual which can be requested from CAT or the manufacturer.
Details on the type and nominal specifications of the fuses are set out on the machine’s data plate, on electrical schemes as well as on the fuses..