Danger
Indication / Instruction
Residual risk
Transport phase
Installation phase
Maintenance phase
Unit interaction
Normal unit operation
Generated by unit use environ-
ment: electromagnetic distur-
bances caused by interference
between devices placed near the
machine and the machine itself.
In the user-installer manual
under paragraph 5.9 is recom-
mended to power the unit via a
dedicated line and protections. It
is also recommended to use an
independent cable duct in order
to remove the possibility of inter-
action with other devices.
Failure to comply with the
recommendations regarding the
electrical system.
X
Generated by unit use environ-
ment: possibility of breakage of
components / supports caused by
corrosion and oxidation
The user-installer manual under
chapter 9 contains specific
warnings on maintenance and
cleaning to be carried out on the
surfaces of the sheets and heat
exchange coils. The technical
bulletin provides advice on the
treatments to choose based on
the environmental conditions.
Failure to comply with cleaning
and maintenance and / or incor-
rect assessment of the atmo-
spheric agents that characterize
the installation site.
X
X
To Next Page
Loading...
