Unicorn LS2-H540 User Manual

- 14 -
❶
❷
❻
❹
❼
❽
❸
❺
ꊝꊧ
❾
ꊝꊦ
☞
INSERT THE BOBBIN① ONTO THE BOBBIN W INDER SHAFT②.
☞
PUSH THE BOBBIN WINDER STOP LATCH③ ALL THE WAY DOWNWARD.
☞
WIND THE THREAD AROUND THE BOBBIN① A FEW TIMES(IN THE DIRECTION O F THE
ARROW), AND THEN OPERATE THE MACHINE.
☞
IF THE THREAD CANNOT BE WOUND EVENLY, LOOSEN THE THREAD GUIDE SCREW④, AND
MOVE THE THREAD GUIDE⑤ TO THE RIGHT OR LEFT.
☞
TO WIND THE THREAD ONTO THE BOBBI N, MAKE ADJUSTMENT BY TI GHTENING THE
SCREW⑥.
※ IN CAS E OF RO TATIO N T HE MACHINE WITHO UT S EWING KEE P THE PRESSER FOOT RAISED.
3. 윗실 끼우는 법 / HOW TO ROUTE THE UPPER THREAD
☞
실채기를 최고의 위치에 올려놓고 그림과 같이 윗실을 끼워 주십시오.
☞
실 끝을 약 50㎜정도 잡아 당겨 주십시오.
☞
RAISE THE THREAD TAKE-UP LEVER TO THE HIGHEST POSITION AND ROUTE THE
THREAD AS SHOWN IN FIG.
☞
PULL O U T T HE EN D OF T HE T HREAD ABOU T 50㎜ T HROU GH T HE NEEDLE EYE.
4. 밑실 끼우는 법 / HOW TO ROUTE THE LOWER THREAD
☞
북집에 실토리를 넣어 주십시오.
☞
실을 실홈① 사이로 끼워서 실조절판 스프링②의 밑으로
걸어 주십시오.
☞
INS E RT T HE BOBBI N INTO T HE BO BBIN C ASE .
☞
P ASS THE END OF THR EAD THROUGH THE
SLIT①, AND PULL OUT THE THREAD.

Unicorn LS2-H540 Specifications

General

Brand	Unicorn
Model	LS2-H540
Category	Sewing Machine
Language	English