Installation
★ Machine installation should only be
carried out by a qualified technician.
★ Contact your Unicorn dealer or a
qualified electrician for any electrical
work that may need to be done.
★ The sewing machine weighs more than
44kg.
The installation should be carried out by
two or more people.
★ The top of the table should be 40 mm
in thickness and should be stron
enough to hold the weight and
withstand the vibration of the sewin
machine.
★ Do not connect the power cord until
installation is complete. otherwise the
machine may operate if the treadle is
depressed by mistake, which could
result in injury
★ Be sure to connect the ground. If the
ground connection is not secure,
ou
run the risk of receiving a serious
electric shock.
★ Refer to the instruction manual for the
motor for details on installing and
using the motor.
★ All cords should be secured at least 25
mm away from any moving
arts.
Furthermore. do not excessively bend the
cable or secure it too firmly sta
les
otherwise shocks could occur
★ install the belt covers to the machine
head and motor.
★ Be sure to wear protective goggl es and
gloves when handling the lubricating oil
and grease, so that they do not
et
into your eyes or onto your skin
otherwise inflammation can result.
Furthermore, do not drink the oil or eat
the grease under any circumstances
as they can cause vomiting and
diarrhoea.
Keep the oil out of the reach of
children.
★ Avoid setting up sewing machine near
sources o strong electrical noise such
as high-frequency welding equipment.
If this precaution is not taken, incorrect
machine operation may result.
Sewing
★This sewing machine should only be
used by operators who have received
the necessary training in safe use
before hand.
★The sewing machine should not be used
for any applications other than sewing.
★ Do not touch any of the moving
arts
or press any objects against the
machine while sewing. as this ma
result in
p ersonal injury or dama ge to
the machine.
- 4 -
★ Wait at least 5 minutes after turning off the power switch and disconnecting the power
cord from the wall outlet before opening the face plate of the control box. Touchin
areas where high voltages art present can result in severe injury.
ꍾ Notes on safety
To Next Page
Loading...
Need help?
General
