49
-3, -2, -1, 0, 1, 2, or 3
Note: You can also toggle volume offset for a channel in scan hold mode by pressing Func
then 0(LVL).
Delete Channel – Deletes the Channel.
At Confirm Delete? press E/yes or ./no.
New Channel – See New Channel.
SET SCAN SELECTION
Manage Quick Key Status – This is one way to enable or disable your System quick keys and
Favorites Lists quick keys. The other way is using the number keys on the keypad. See Selecting
Quick Keys.
Favorites Quick Key
Scroll to each Favorites List quick key and press E/yes to enable or disable.
System Quick Key
Scroll to each Favorites List and press E/yes.
Favorites List
Scroll to each System quick key and press E/yes to enable or disable.
Set Nationwide Systems (Database Only) – This setting enables or disables Nationwide
systems in the Database, only when the Database is being scanned.
Scroll to each Nationwide System and press E/yes to enable or disable.
Select Lists to Monitor – This setting enables or disables your Favorites Lists and the database
for scanning. You must rst enable each list here, before you can enable the quick key for the list
or you will see Nothing to Scan.
Note: You will need to set a location to enable the database.
Scroll to the Full Database, Search with Scan, or each Favorites List, then press E/yes to
enable or disable.
For Search with Scan, see also Search with Scan and Edit Custom Search.
Set All Lists Off/On – These settings turn all Favorites Lists on or off.
Select Set All Lists Off/On then press E/yes to toggle each setting.
MANAGING FULL DATABASE
Press Menu then scroll to Manage Full Database and press E/yes.
Scroll to the options below and press E/yes.
Review Avoids – You can review all Systems, Departments, and Channels that are avoided and
stop avoiding each one.
Note: The Database must be enabled for scan to review Avoids.
Scroll to each System, Department, or Channel and press E/yes to stop avoiding. Temporary
Avoids appear reversed in the display -
.
Stop All Avoiding – This will stop avoiding all Systems, Departments, and Channels in the
Database.
At Confirm Delete?, press E/yes or ./no.
To Next Page
Loading...
Need help?
General
