EasyManuals Logo

Uniden BCD436HP Owner's Manual

Uniden BCD436HP
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
72
Modulation
Press Func then Channel(MOD) for all bands.
Intermediate Frequency Exchange
Press Channel to hold on any frequency.
Press Func then 7(IFX) to toggle on or off.
Repeater Frequency
Press Channel to hold on any frequency.
Press Func then press and hold 8(REV).
Replay the Last Transmissions
Press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording
Press Func then Replay.
Note: Resets to Off when you turn off the scanner.
Storing
Displayed Frequency into a Quick Save Department. Press E/yes.
You will see Saving to Quick Save Department in the display then press E/yes.
The scanner stores the frequency into the Quick Save Department.
Displayed Frequency into an Existing Department Press E/yes.
You will see Saving to Quick Save Department in the display, then press ./no.
At Select Department, scroll to the department where you want to store the frequency and
press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete the settings
for the new channel.
If you don’t want to edit the channel settings or are done editing the channel, press Avoid
to return to searching.
Close Call Menu
Press Func then Menu.
WEATHER OPERATION
WEATHER OPTIONS
Press Menu. Scroll to WX Operation and press E/yes.
Scroll to the options below and press E/yes.
Set Delay Time WX Alt Priority
Set Attenuator Weather Scan
Set Audio AGC Weather Alert

Table of Contents

Other manuals for Uniden BCD436HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden BCD436HP and is the answer not in the manual?

Uniden BCD436HP Specifications

General IconGeneral
ModelBCD436HP
AntennaRemovable SMA Antenna
Close Call RF CaptureYes
Dynamic MemoryYes
PC ProgrammableYes
Water ResistanceNo
CategoryScanner Radio
DisplayDot-matrix LCD
Power Source3x AA batteries or USB power
Weight10.1 oz
TypeHandheld
GPSOptional GPS receiver supported
Audio OutputEarphone jack (3.5 mm)
Trunking Systems SupportedMotorola, EDACS, LTR, APCO 25 Phase I and Phase II
Modulation TypesAM, FM, NFM, P25
Battery LifeVaries with usage
Display TypeLCD
USB PortYes
SD Card SlotYes
Frequency Range25-512 MHz, 758-960 MHz, 1240-1300 MHz

Related product manuals