! You must have at
least two handsets
to use Direct Link
Mode.
Setting Menu Options
Entering the Menu.
• Press the soft key to access the main menu.
• Use to scroll through options.
• Press the soft key to make a selection.
• Press the soft key to return to the previous screen.
• Press on the handset or on the base to exit
the menu.
In DirectLink mode, a pair of handsets can function as two-way radios. DirectLink
Mode allows two handsets to communicate with each other without the base unit or
a telephone line. Use them at sporting events or while shopping to stay in contact
with family members or friends. You must set both handsets to DirectLink Mode to activate
this feature.
1. Press the soft key and select the DirectLink
Mode menu.
appears.
2. Press the soft key to enter DirectLink mode.
You will hear a confirmation tone, and appears.
3. To return to normal mode, press the soft key and then the soft key, or
return the handset to the cradle.
MENU
OK
BACK
MENU
ENTER
CANCEL OK
/volume up/down
end cid/exit
DirectLink Mode (Handset Only)
Using DirectLink Mode
To enter DirectLink mode press
[ENTER]
DirectLink Mode Complete
BACK OK
Directlink Mode
Room Monitor
Handset Setup
BACK
ENTER
To enter
Directlink mode
press [ENTER]
BACK OK
Room Monitor
Contrast
Answ. Setup
Handset
Base
[15]