To mute the ringer tone temporarily for each handset or the base, when the phone is ringing,
press the soft key on the handset or the base. The ringer tone will return to the previous
setting starting with the next incoming call.
You can temporarily mute the microphone so that the caller cannot hear you.
1) Press the soft key during talk mode (while the
phone is in use) to mute the microphone
2) and appear in the display. To cancel muting,
repeat above step again when Mute is set to on,
appears.
If your telephone company requires pulse dialing, you can switch
over to tone dialing after the call connects. This feature is useful
when you need tone dialing to use any automated menu systems,
such as telephone bank tellers, telephone prescription refills,
customer support menus, etc.
If your phone is set to pulse dialing mode, make your call normally. Once your call connects,
press the on the handset or base Any digits you enter from then on will be sent as
tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode.
MUTE
With the handset
MUTE
With the Base
Mute Microphone
Tone Dialing Switch-over
Mute On
Mute Off
1) Press the soft key during talk mode (while the phone is in use) to mute the microphone
2) and appear in the display. To cancel muting, repeat above step again when Mute is
set to on, appears.
MUTE
Mute On
Mute Off
(Australia only)
/tone/ < .
Talk
Mute On
MUTE MENU
[34]
BASICS
To Next Page
Loading...
Need help?
General
