Need help?Do you have a question about the Uniden U60 4G CELLULAR BOOSTER UNI-2005-CPAL and is the answer not in the manual?
General| Part Number | UNI-2005-CPAL |
|---|---|
| Type | 4G Cellular Booster |
| Gain | Up to 60 dB |
| Power Output | Up to 20 dBm |
| Connector Type | SMA |
| Frequency Band | 700MHz |
| Compatibility | All major carriers |
| Power Supply | 12V DC |
| Model | U60 4G CELLULAR BOOSTER UNI-2005-CPAL |
Details the installation and grounding requirements for the optional lightning surge protector.
Details how to mount and connect the outdoor antenna to the booster using coaxial cable.
Emphasizes the importance of vertical separation between indoor and outdoor antennas to prevent oscillation.
Details the procedure for powering on the cellular booster after all connections are made.
Explains the meaning of LED colors (Green, Orange, Red, OFF) indicating booster status and potential issues.
Details the function of dip switch sections (A, P, C, L) for attenuating specific frequency bands.
Lists checks to perform when experiencing weak signal strength, focusing on antenna aim and connections.
Addresses causes for LED indicator issues and provides troubleshooting steps related to oscillation.
To Next Page
