UniFi Cloud key Gen2 Plus Quick Start Guide

LED
White
Device is ready to be configured
Flashing White
Device is booting up
Device is initializing/deinitializing
Heartbeat White
Firmware update in process
Blue
Device is configured and ready
Flashing Blue
Main power has been lost and device is counting down.
If power is restored within 10 seconds, the device will
return to its previous state. If power is not restored within
10 seconds, the device will safely shutdown.
Slow Flashing Blue
Client connected to device via Bluetooth (BLE)
Flashing White/Blue
Device is in recovery mode.
The LED will cycle through a pattern at one-second
intervals, between off, white, and blue.
Security Slot
Allows the Cloud Key Gen 2 Plus to be used with a Kensington security lock (not
included). When used, it also prevents removal of the HDD while the device is in use.
Rack-Mount Notch
Secures the Cloud Key Gen2 Plus into the docking bay of the optional Rackmount
Accessory, model CKG2-RM (sold separately). The Rackmount Accessory allows you to
install the Cloud Key Gen2 Plus in a standard 19" rack.
Note: The Rackmount Accessory is completely optional and not required for
the Cloud Key Gen2 Plus to function.

UniFi Cloud key Gen2 Plus Specifications

General

Brand	UniFi
Model	Cloud key Gen2 Plus
Category	Controller
Language	English