Unify OpenScape Desk Phone CP400 - Activating or Deactivating Immediate Dialing

157
Activating or deactivating immediate dialing
Sofortwahl should only be activated if your administrator has configured and ap-
proved a dial plan.
Sofortwahl is deactivated by default. For this reason after entering the number
you must either confirm the "Wählen" option or wait until the dial delay expires
to set up the connection. If Sofortwahl is configured, your call is automatically
dialed as soon as the string entered matches an entry in the dial plan.
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
€ Select the "Immediate dialling" function.
Activate with the Softkey.
Save the setting by selecting the Softkey.
Settings
_
$
User settings
-
_
$
Configuration
-
_
Outgoing calls
-
_
Immediate dialling
¢_
Q
_