167
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are making a call. Re-
cording has started. The recording button LED lights up.
[ You are making a call (see also page 165).
Press the Softkey to pause the recording - the LED extinguishes and the record-
ing symbol
| on the display disappears.
You can start the recording again at any time, for example to continue recording
the current call.
Ending call recording automatically
Prerequisite: You are making a call. Recording has started. The recording but-
ton LED lights up.
] or É The recording is ended automatically as soon as the call is ended or if the call
status changes so that the call is no longer being recorded.
The LED extinguishes and the recording symbol
| on the display disappears.
Consultation during call recording
Prerequisite: You are making a call. Recording has started. The recording but-
ton LED is lighting.
You initiate a consultation – your main call is placed on hold as a result while the
consultation is being performed.
j The recording is paused while you initiate the consultation. The recording sym-
bol
| on the display disappears.
[ If the consultation partner answers, the consultation call is recorded. You hear a
beep and the recording symbol
| is shown on the display again.
You can now terminate the consultation call or for example switch back to the
first call party (alternate) while the consultation call is placed on hold.
Second call during call recording
Prerequisite: You are making a call. Recording has started. The recording but-
ton LED is lighting.
[ You are making a call. You hear a beep and the recording symbol | is shown
on the display. The call is now being recorded.
A second call party camps on
page 74.
Press the Softkey. You are connected with the second party. You hear a beep
and the recording symbol
| is shown in the line for the second call – this call is
now being recorded. The first party is placed on hold.
Call recording while alternating
Prerequisite: You have an active or held consultation or second call. Recording
has started. The recording button LED is lighting.
[ You are connected with the second party. You hear a beep and the recording
symbol
| is shown in the line for the second call.
Press the Softkey.
Call recording
ƒ
¤
Accept
O
_
Alternate
R
_
To Next Page
Loading...
