Unify OpenScape Desk Phone CP400 - Call Pickup; Deflecting a Call to a DSS Subscriber

95
Call pickup
You can pick up calls for the DSS subscriber. The LED flashes if a call is incom-
ing for this station's line.
Indirect pickup
Prerequisite: The auto-answer function is deactivated  page 143.
Press the DSS key. The call is routed to your primary line and rings.
^ or : or . Lift the handset or press the speaker or headset key. You are connected to the
subscriber.
Rejecting a call
Prerequisite: Your administrator enabled the Reject option for DSS keys and
deactivated Auto-answer
 page 143.
Press the DSS key. The call is routed to your primary line and rings.
Press the Softkey. The caller hears a busy signal.
Direct pickup
Prerequisite: The auto-answer function is activated  page 143.
Press the DSS key. The call is routed to your primary line and you are immedi-
ately connected with the other party via speakerphone.
Deflecting a call to a DSS subscriber
Prerequisite: The deflect function is enabled for DSS keys. For information on
the current setting, see
 page 150.
If you receive a call on one of your lines, you can immediately deflect it to the
DSS subscriber.
Your phone rings and a line key flashes.
Press the relevant DSS key. The call is deflected to the DSS subscriber. If the
DSS subscriber does not answer, you can pick up the call by pressing the line
key.
Office
£
Office
£
Reject
P
_
Office
£
Line 3
£
Office
_