Need help?Do you have a question about the UNIMAT Basic 1 and is the answer not in the manual?
Essential safety guidelines for operating the Unimat 1 Basic and its components.
Identification of main structural parts like the machine bed, motor, and tailstock.
Details collets, screwdrivers, jig saw parts, and table components.
Lists saw blades, eccentric parts, turning chisels, and sanding accessories.
Details screws, nuts, connection pieces, and assembly wrenches.
Lists items like power adapter, goggles, stickers, and slip stoppers.
Steps for preparing the base and mounting the motor unit.
Mounting collets, attaching turning tools, and securing the workpiece.
Adjusting support, tightening components, and performing turning operations.
Attaching the motor unit and drive system for the jig saw.
Mounting the jig saw table and inserting the saw blade.
Instructions for safely performing cutting operations with the jig saw.
Assembling the motor unit and drive system for sanding.
Mounting the sanding disc and preparing the machine for use.
Instructions for safe and effective sanding.
Assembling the motor unit and drive for the handheld drill.
Instructions for safe drilling operations.
Guidance on using the mounting plate and its dimensions.
Instructions for checking and adjusting the longitudinal slide.
Regular cleaning and lubrication of the slides for optimal performance.
Detailed technical data for each component like motor, headstock, and tailstock.
Technical details for the woodturning lathe, jig saw, and sanding machine.
General| Brand | UNIMAT |
|---|---|
| Model | Basic 1 |
| Category | Power Tool |
| Language | English |
To Next Page