To Next PageTo Next Page
Need help?Do you have a question about the UnionSpecial 63900 Series and is the answer not in the manual?
General| Brand | UnionSpecial |
|---|---|
| Model | 63900 Series |
| Category | Sewing Machine |
| Language | English |
Lists the key features and benefits of the Class 63900 machines.
Details the various styles within the Class 63900 sewing machines.
Provides guidance on choosing the correct needle size based on thread type and size.
Instructions and important notes for ordering replacement parts for the machines.
Steps for preparing the sewing machine after unpacking.
Describes how the sewing machines are installed in table tops for flush mounting.
Instructions on how to properly lubricate the sewing machine and oil types.
Explains how to check and adjust the oil level in the machine's reservoir.
Details the installation and maintenance procedures for the oil siphon system.
Information on needle thread twist direction and threading the machine.
Step-by-step guide on how to wind a bobbin for the machine.
Instructions on how to properly thread the bobbin case.
Procedures for removing and reinstalling the bobbin case.
Steps for correctly inserting the needle into the needle bar.
Explains the importance of needle and bobbin thread tensions for stitch quality.
How to adjust the tension of the needle thread for optimal stitch formation.
Instructions on how to adjust the stitch length using the machine's controls.
Guidance on adjusting the pressure exerted by the presser foot on the material.
Detailed steps for setting the correct height of the needle bar.
Instructions for timing the hook with the needle for proper stitch formation.
Specific instructions regarding the needle guard and its adjustments.
Procedures for lubricating the hook mechanism and checking oil flow.
How to adjust the height of the feed dog for proper material feeding.
Instructions for setting the presser bar connection for styles A and B.
Instructions for setting the presser bar connection for styles C, D, and AL.
Details on setting the presser bar guide for styles A and B.
Details on setting the presser bar guide for styles C, D, and AL.
Steps for adjusting the machine's tension assembly for proper operation.
How to adjust the tension release mechanism for correct function.
Guide for checking and adjusting thread control for specific machine styles.
Guide for checking and adjusting thread control for styles C, D, and AL.
Instructions for removing and replacing the machine's bottom cover.
Information on setting and maintaining the hook shaft position.
Details on the alignment of the upper main shaft and take-up mechanism.
Instructions for the re-assembly of the handwheel.
Steps to re-adjust the stitch length indicator after feed timing changes.
Procedures for timing the machine, including feed timing adjustments.
Important considerations for the position of the lower main shaft.
Detailed steps for synchronizing needle feed and drop feed mechanisms.
Detailed breakdown of parts related to the main frame, bushings, and oil siphon.
Lists and illustrates the parts specific to the needle feed driving mechanism.
Explains the components of the feed driving and stitch regulating systems.
Details the parts for the rotating hook assembly and its oiling system.
Specific details regarding the needle hole size in feed dogs.
Details the specific bottoms and yielding sections for different presser feet.
Describes systems for tracking machine maintenance and repair costs.
Explains the benefits of maintaining an organized inventory of spare parts.
