To Next PageTo Next PageWhat to do if Unipower Aspiro 1U shows Mains Error?
If your Unipower Power Supply shows a Mains Error, it means the AC supply is OFF on one rectifier in a system with only one plugged-in rectifier, or OFF on at least two rectifiers in a system with a minimum of two rectifiers plugged in. Make sure the AC input breaker is ON and verify the AC input connection.
What causes Module Failure in Unipower Aspiro 1U Power Supply?
A Module Failure in Unipower Power Supply can be caused by a faulty module, AC being OFF on a single rectifier (if more than one rectifier is installed), a rectifier current sharing fault, low DC output voltage, overvoltage shutdown, module fan failure, or the module overheating. Check if the module sends an alarm flag. Verify the AC voltage to the failed module. Try re-inserting the faulty module and wait for 30 seconds. If problems persist, replace the faulty module.
General| Brand | Unipower |
|---|---|
| Model | Aspiro 1U |
| Category | Power Supply |
| Language | English |
