Unipower Bluestrak Series - Figure 9 A - Model TBSR1 U4 A with IEC Connectors; Figure 9 B - Model TBSR1 U4 B with Terminal Block Connections; Compatible 19-Inch Power Shelves

Page 21
BLUESTREAK SERIES
INSTALLATION & OPERATING MANUAL
POWERING TECHNOLOGY
Document Number: BLUESTREAK-MAN Rev. 6
bluestreak-man-rev6-0719.indd
15.0 COMPATIBLE 19-INCH POWER SHELVES
There are four 19-inch compatible power shelves with single and dual bus congurations being
available. These power shelves have the following features:
• Standard 19-Inch Rack-Mounting
• Only 1U High
• Hot-Swap Operation
• Holds up to Four BLUEstreak Modules
• Single or Dual Output Bus
• Terminal Block or IEC Connectors for AC Input
15.1 Ordering Guide
4-BAY 19” SHELF SYSTEM ORDERING GUIDE
MAX.
POWER
DESCRIPTION MAX.
CURRENT
MODEL
NO.
8000W Single Output Bus - IEC60320-C20 Input (AC only) 400A TBSR1U4A
8000W Single Output Bus - Terminal Block Input (AC or DC) 400A TBSR1U4B
8000W Dual Output Bus - IEC60320-C20 Input (AC only) 200A/200A TBSR1U4C
8000W Dual Output Bus - Terminal Block Input (AC or DC) 200A/200A TBSR1U4D
Blanking kit for unused position, order pt. no. 775-1501-0000.
15.2 Single Bus Power Shelves – Rear views of the single bus types are shown in gure 9 below.
J1 J2 J3
SW1
AC4 AC3
+V -V-V Frame
Ground
AC2 AC1
OUTPUT A
200A Max. 200A Max.
OUTPUT B
0.625 (15.88) 1/4-20
8-32
0.5” length
Figure 9a - Model TBSR1U4A with IEC Connectors
J1 J2 J3
SW1
OUTPUT A
AC4/AC3
or
DC4/DC3
+V +V -V-V
200A Max. 200A Max.
Frame
Ground
AC2/AC1
or
DC2/DC1
OUTPUT B
0.437 (11.10)
0.625 (15.88) 1/4-208-32
8-32
0.5” length
Figure 9b - Model TBSR1U4B with Terminal Block Connections
AC inputs are supplied separately to each module either via IEC60320-C20 connectors or
terminal block connections. The terminal block connections are #8-32 threaded screws with
a 0.437” spacing, see gure 9b above.