8.4 PQ ONLINE
PQ Online is mainly used for configuring the measuring devices UP-2210, Unilyzer 900/900C and
Unilyzer 902, but is also used as a communication program between the measure site and the office.
In that case, PQ Online is used for the manual polling of measure data or for real-time analysis.
8.4.1 Connect
When you have started the program and pressed “Connect” a connect to meter dialogue will
automatically appear. Here you select the communication method chosen for connecting the
computer with the meter.
You can contact a meter in three different ways:
Ethernet
Here you must specify the meters IP address that the
unit has been configured with. It is possible to select
different ports in order to route different meters on
one IP address. The default port is 16421.
To Next Page
Loading...
