Unipower UP2210 - Measurement Settings; Wire-Connection Configuration. Settings Wizard

UNIPOWER
UP-2210 Hardware installation and configuration manual
70
8.4.2 Measurement settings
In measurement setting you can view information about the actual settings, see Figure 57.
8.4.2.1 Wire-connection configuration. Settings wizard,
You can use the settings wizard that guide you through the configuration of your meter. Press Setting
wizard…button in Figure 57
Now you will get possibilities to setup the meter in three, (A, B and C), different ways as Figure 58
below show.
Figure 57
B
A
C
Figure 58