8.4.6 Tools
In Tools there are four tabs.
A, Status tab. In status tab you can see Date and time info for the meter, Hardware info and
transducer info. You can set the time in meter to same time as in System by clicking on arrow E.
You can restart the meter by pressing on restart meter button F.
B, Manual trig tab. Her you can manually trig a sag, transient or a slowscan.
C, License tab. In license tab you see the actual licenses for the meter.
D, Firmware tab. The is also a way to upgrade the firmware in the meter. Here you specify the file
and firmware update code.
To Next Page
Loading...
