Unipower XPGe12.48 - Alarm and Signal Connections; Figure 4-9 Battery Connection; Figure 4-10 Alarm Connections

Page 25
POWERING TECHNOLOGY
Manual No. aspiro2u-3
aspiro2u_m23-man-rev3-0516.indd
Battery -48 V
Battery 0V
Figure 4-9 Battery Connection
4.9 Alarm and Signal Connections
For remote supervision of the alarms, there are a maximum 4 potential free alarm contacts
available. Each alarm contact represents dierent alarm condition, dependent on system
conguration.
The alarm connections are located on the top right side of the subrack on the Alarm Interface.
Use suitably sized alarm cables: Max. 14AWG/1.5mm².
The Connection of all alarms are shown in Figure 4-10.
1
2
3
X
C5
X
C5
1
2
3
X
C6
X
C6
4
5
6
4
5
6
Alarm
1
Alarm
2
Alarm
4
Alarm
3
NO
NO
NO
NO
NC
NC
NC
NC
C
C
C
C
Figure 4-10 Alarm Connections
NOTE Alarm contacts are shown in alarm position.