Unipower XPGe12.48 - Battery and Load Breakers Replacement

Page 42
POWERING TECHNOLOGY
Manual No. aspiro2u-3
aspiro2u_m23-man-rev3-0516.indd
1 2
Figure 7-4 Replacing an XPGe12.48 Rectier
7.3 Battery and Load Breakers Replacement
WARNING Make sure the system is switched OFF.
The power rack is designed front accessible for easy maintenance. Battery and load breakers
can be replaced without removing the power rack from the cabinet.
This section describes how to replace faulty breakers.
1. Unscrew the three retaining screws and then remove the front and the top covers see
Figure 7-5 and Figure 7-6.
Figure 7-5 Removing the front panel