Need help?Do you have a question about the Unipro UniGo 5005 and is the answer not in the manual?
General| Model | UniGo 5005 |
|---|---|
| Mounting Type | DIN Rail |
| Frequency | 50/60 Hz |
| Timer Resolution | 0.1 s |
| Operating Modes | Interval |
| Time Range | 0.1 s to 9999 h |
| Timer Range | 0.1 s to 9999 h |
Key instructions to ensure safe operation and handling of the UniGo Laptimer.
Step-by-step guide for securely mounting the Laptimer onto the steering wheel for optimal visibility.
Instructions for connecting the UniGo Laptimer to a power source, including battery options.
Details on how to connect the RPM wire to the engine's ignition for accurate speed readings.
Instructions on how to enter the setup menu directly from the main menu.
Details on navigating menus, changing values, and saving settings in the setup mode.
Highlights the menu containing frequently accessed settings for quick adjustments.
Covers settings related to the race track, including name, receiver, and magnet configuration.
Setting the number of magnets on the track for accurate lap triggering with a magnet receiver.
Adjusting the delay to skip magnets when entering the track from the pit lane.
Setting minimum time between triggers for IR or loop receivers to prevent false triggers.
Options for setting split points, including using magnets or the wheel sensor.
Detailed setup for individual split points, allowing up to 8 points per lap.
Settings related to the kart, such as wheel size, tire wear, and gear configuration.
Inputting the wheel circumference for accurate speed and distance calculations.
Configuring and managing tire wear counters to track distance driven on sets of tires.
Inputting the total number of gears for the kart for gear calculation.
Procedure to teach the UniGo Laptimer the gear ratios by driving.
Settings related to the engine, including stroke and timers.
Configuration options for up to five engine timers to track usage hours.
Configuring the engine stroke for accurate RPM calculations and performance.
Setting the engine revolution threshold for the gear shift indicator LEDs.
Defining the RPM range between shift light LEDs for gradual indication.
Choosing whether shift lights use individual LEDs or all LEDs simultaneously.
Setting the initial duration for engine run-in mode before pit return.
Setting the target temperature for engine run-in to avoid overheating.
Setting the target RPM range for engine run-in to ensure proper break-in.
Customizing the data fields shown in different run modes and analyze screens.
Programming the five LEDs for specific warnings, shift lights, or other indicators.
Configuring the voltage threshold for the low battery warning indicator.
Implementing a password to protect USB data access and connection.
Resetting all Laptimer settings back to their original factory defaults.
Comprehensive guide on using the Laptimer's functions, buttons, and modes.
Overview of the programmable warning LEDs and their role in alerting the driver.
Details on using the Laptimer's LEDs as a gear shift indicator for optimal gear changes.
Explanation of how UniGo logs data into sessions and the concept of different run modes.
Introduction to the analyze mode for reviewing recorded data directly on the Laptimer.
Menu for managing stored sessions, including deletion and status checks.
Special mode for breaking in new engines, with target temperature, RPM, and time settings.
Instructions for connecting the Laptimer to a PC/MAC via USB for data transfer.
Accessing the USB menu when a Unipro USB flash key is connected.
Procedure for updating the UniGo Laptimer's firmware using a USB flash key.
Configuring a password to secure USB connections and data access.
Detailed steps and screens involved in performing a firmware update on the UniGo Laptimer.
Addresses issues where the Laptimer shuts down unexpectedly when using a LiPo battery.
Steps to resolve issues where the UniGo Laptimer fails to power on.
Guidance on handling generic error messages and contacting support.
To Next Page
