6.Navigation Remote
Overview
The U1 Smart Light can be connected to the U1 Navigation Remote. This enables Turn Signals,
Brake Light and Remote Power on your Smart Light(s).
EN
Pairing trough App (recommended) Offline Pairing
1. Power on 1 Smart Light first
(should be off before you begin).
1. Power on your Smart Light(s).
2. Pair it to the UNIT 1 App.
3. Add a Nav Remote via the App.
4. Follow the on-screen instructions.
* This method allows pairing a Nav Remote to
multiple devices (and the App) at the same time.
* This method requires you to pair 1 device at a time
and doesn’t allow for customization within the App.
2. Press & hold any button on the Nav
Remote (lights will blink left & right).
3. Wait for connection. Smart Light and
Nav Remote will both flash yellow.
4. Repeat the process to add an
additional U1 device (Light or Helmet).
23
To Next Page
Loading...