43
Voice Related Problems
Symptoms Possible Problems/ Solutions
There is no dial tone.
Please wait for 1~2 minutes after the router is turned
on.
If the SIG indicator is weak, you have no good RF
reception. Change the location of the router.
There is a prompt / phone
alert / announcement as
soon as I lift the phone o
the hook.
Make sure your nano-SIM card is inserted
correctly and the PIN number has been entered. If
the PIN number has been entered incorrectly, you
need to enter the PUK code when prompted.
The line is noisy/distorted
when I lift the phone o the
hook.
y
Remove any electrical appliance which is too
close to the phone or your device.
y
The cable or phone set might be faulty.
I hear a rapid engaged
tone as soon as I lift the
phone o the hook.
y
Put the phone on the hook and try again.
y
Please contact your service provider.
After dialing the last digit I
hear nothing/silence.
When you have nished dialing you can press the
# key or wait 4~8 seconds to connect the call.
To Next Page
Loading...