5
• The hearing instrument(s) will play a repeated
beep when the trial period expires. The repeated
beep is designed to render the hearing instruments
unusable and can only be turned o following
reconnection with the fitting software.
• Print out the Getting Started Guide for your client.
Note: the hearing instrument(s) can be programmed to
any technology level for each trial period.
Note: you can transfer a fitting to / from a Flex:trial
hearing instrument using the Transfer wizard found
under Hearing Instruments > Transfer Fitting.
Note: if you have any concerns about Flex:trial hearing
instrument(s), please contact your distributor.
Flex:trial hearing instrument(s) should be cleaned and
sanitized prior to re-use and disposable items, such as
domes, should be replaced.
Please review the relevant safety information with your
client and provide them with a copy of the Unitron
product user guide. Additional user guides can be
obtained from your distributor.
Print a Getting Started Guide from the End Fitting > Fitting
Summary screen
To Next Page
Loading...
