Place the AXON™ SL with M-LOK® Mounting Kit in
desired location on the rail. Guide the M-LOK® Screws
with the M-LOK® Nuts installed through the desired
M-LOK® slot. Lightly snug both Screws before applying
torque with the T15 Torx Key. When torquing, do not
exceed 10 in-lbs (1.13 Nm). Ensure M-LOK® Nuts are
fully perpendicular to M-LOK® slots in rail (fully seated).
4
INFO@U NITY TACT ICAL.COM
©2024 UNITY Tactical. All Rights Reserved.
Specications subject to change without notice. PAT: UTIP.CO
To Previous Page
Loading...