You can save changes to a user Rig. For factory Rigs that you have modified, you must Save a
Copy.
Save a copy of a Rig
Use Save a Copy when you are saving changes to a factory Rig, or if you want to preserve a
modified version of the Rig without overwriting it.
The Rig is automatically saved with "Copy" appended to the name.
Restore a Rig
If you have made changes to a Rig, including changes saved with the footswitches, you can
restore the Rig to return it to its saved state.
Viewing and selecting Rigs
To view and select Rigs, tap a category at the top of the screen (User, Factory, or Favorite), and
tap a Rig. The Rig is loaded into the current Rig knob Assignment and footswitch location.
User includes all Rigs you have stored on the pedal. Note that there are no user Rigs until
you store them.
Factory includes Rigs made by UA sound designers, including all Rigs from the OX Amp
Top Box.
Favorite includes presets that you have swiped as favorites. Note that there are no Favorite
presets until you favorite them.
In the UAFX Control app, tap ••• next to the active Rig to open Rig options.
1
Tap Save to save the rig.
2
In the UAFX Control app, tap ••• next to the active Rig to open Rig options.
1
Tap Save a Copy.
2
In the UAFX Control app, tap ••• next to the active Rig to open Rig options.
1
Tap Restore. The Rig is restored to the last saved version or the factory settings.
2
To Next Page
Loading...
