12
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.
Mailing address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
13
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.
Mailing address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
FIGURE 4
Step 29.
Step 30.
Step 31.
Step 32.
NOTE: The CONNECT CABLE (21) is the shorter of the two cables.
C1
Place BALL end of CONNECT CABLE (21) in SLOT of bracket on UPRIGHT (1) to lock in place.
C2
Place CONNECT CABLE (21) in groove of PULLEY (26) and attach to SINGLE PULLEY BRACKET (9) with 3/8”
x 1-3/4” HEX HEAD BOLT (41) and 3/8” NYLON NUT (50).
C3
Place CONNECT CABLE (21) in groove of PULLEY (26) and attach to bracket at top of UPRIGHT (1) with 3/8” x
1-3/4” HEX HEAD BOLT (41) and 3/8” NYLON NUT (50).
C4
Insert adjustment bolt of CONNECT CABLE (21) through RING of SELECTOR PIN (18) and thread into SELEC-
TOR ROD (12) about 3 or 4 turns and lock by tightening nut against SELECTOR ROD.
To Next Page
Loading...
