22
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.
Mailing address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
FIGURE 9
Step 83.
Step 84.
Step 85.
Step 86.
L1
Place LOWER CABLE (52) in groove of PULLEY (66), with HOOK end facing out, insert into LOWER PULLEY
BRACKET (29) and fasten with 3/8” x 1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
L2
Place LOWER CABLE (52) in groove of PULLEY (66) and attach to FLOATING PULLEY BLOCK (24) with 3/8” x
1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
L3
Place LOWER CABLE (52) in groove of PULLEY (66) and attach to SINGLE PULLEY BRACKET (31) with 3/8” x
1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
L4
Place BALL end of LOWER CABLE (52) in SLOT of bracket on the PRESS UPRIGHT (4).
To Next Page
Loading...
