26
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.
Mailing address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
FIGURE 11
Step 94.
Step 95.
Step 96.
W1
Insert adjustment bolt of WEIGHT CABLE (54) through RING of SELECTOR PIN (48) and thread into SELECTOR
ROD (37) about 3 or 4 turns and lock by tightening nut against SELECTOR ROD.
W2
Place WEIGHT CABLE (54) in groove of PULLEY (66), and attach to pulley bracket of PEC DEC TOP FRAME (10)
with 3/8” x 1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
W3
Insert BALL end of WEIGHT CABLE (54) into SLOT in FLOATING PULLEY BLOCK WITH HOOK (25).
To Next Page
Loading...
