Universal 79130 - Page 28

28
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com.
Mailing address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
FIGURE 12
Step 97.
Step 98.
Step 99.
Step 100.
Step 101.
K1
Insert ball end of PEC DEC CABLE (55) into SLOT of LEFT PEC DEC CAM (15).
K2
Place PEC DEC CABLE (55) in groove of PULLEY (66), and attach to left side of PEC DEC PULLEY BLOCK (28)
with 3/8” x 1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
K3
Place PEC DEC CABLE (55) in groove of PULLEY (66), and attach to DOUBLE PULLEY BRACKET (30) with 3/8”
x 1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
K4
Place PEC DEC CABLE (55) in groove of PULLEY (66), and attach to right side of PEC DEC PULLEY BLOCK
(28) with 3/8” x 1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).
K5
Insert ball end of PEC DEC CABLE (55) into SLOT of RIGHT PEC DEC CAM (16).