18
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com. Mailing
address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
FIGURE 7
Step 55.
Step 56.
Step 57.
NOTE: The CONNECT CABLE (48) has a ball on each end.
C1
Insert ball of CONNECT CABLE (48) into slot in SINGLE PULLEY BRACKET (24).
C2
Place CONNECT CABLE (48) in groove of PULLEY (61) and attach at desired location in FLOATING PULLEY BLOCK
(19) with 3/8” x 1-3/4” HEX HEAD BOLT (87) and 3/8” NYLON NUT (102).
C3
Insert ball of CONNECT CABLE (48) into slot in other SINGLE PULLEY BRACKET (24).
To Next Page
Loading...