22
Please contact Universal
®
Gym Equipment/FFA Corp. for missing or defective parts at one of the following: Phone 1-800-
472-9856 or Fax 1-662-495-5038 or E-mail at customerservice@universalgymequipment.com. Mailing
address: Universal
®
Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.
Website www.universalgymequipment.com
FIGURE 9
Step 64.
Step 65.
Step 66.
Step 67.
Step 68.
Step 69.
Step 70.
NOTE: The PEC DECK CABLE (50) is the shorter cable with a hook on each end.
P1
Place the PEC DECK CABLE (50) into RIGHT PIVOT PULLEY BRACKET (23) and attach PULLEY (61) with 3/8” x 1-
3/4” HEX HEAD BOLT (87) and 3/8” NYLON NUT (102).
P2
Attach RIGHT PIVOT PULLEY BRACKET (23) and SMALL PULLEY (62) to RIGHT PEC DECK ARM (15) with 3/8” x
3-1/2” HEX HEAD BOLT (83), 3/8” WASHER (97) and 3/8” NYLON NUT (102).
P3
Place PEC DECK CABLE (50) in groove of PULLEY (61) and attach to bracket on BASE FRAME (1) with 3/8” x 1-3/
4” HEX HEAD BOLT (87) and 3/8” NYLON NUT (102).
P4
Place PEC DECK CABLE (50) in groove of PULLEY (61) and attach to SINGLE PULLEY BRACKET (24) with 3/8” x 1-
3/4” HEX HEAD BOLT (87) and 3/8” NYLON NUT (102).
P5
Place PEC DECK CABLE (50) in groove of PULLEY (61) and attach to bracket on BASE FRAME (1) with 3/8” x 1-3/
4” HEX HEAD BOLT (87) and 3/8” NYLON NUT (102).
P6
Attach LEFT PIVOT PULLEY BRACKET (22) and SMALL PULLEY (62) to LEFT PEC DECK ARM (14) with 3/8” x 3-
1/2” HEX HEAD BOLT (83), 3/8” WASHER (97) and 3/8” NYLON NUT (102).
P7
Place the PEC DECK CABLE (50) into LEFT PIVOT PULLEY BRACKET (22) and attach PULLEY (61) with 3/8” x 1-
3/4” HEX HEAD BOLT (87) and 3/8” NYLON NUT (102).
To Next Page
Loading...