universalblue JAVA 5045W - Page 44

ENGLISH
44
connected to the water inlet
using the hose and connecting
elements provided with this
appliance.
• When installing the
dishwasher, the power cord
should not be excessively
bent or crushed.
• Never pull the cable to unplug
the dishwasher.
• Do not place the dishwasher
near a gas, vitro or induction
countertop or other high
temperature source.
• Do not handle or touch the
dishwasher with wet hands,
as this may cause an electric
shock or re hazard.
• Do not use this dishwasher
outdoors.
• To avoid electric shock, do
not immerse the cord, plug, or
other parts of a dishwasher in
water or other liquids.
• It is recommended the use
of the dishwasher on a
regular basis, as the energy
and water consumption will
be signicantly lower than
washing the dishes manually,
always considering all
instructions provided in this
manual.
• This appliance must be
earthed. In the event of a
malfunction or breakdown,
earthing will reduce the
risk of an electric shock by
providing a path of least
resistance of electric current.
This appliance is equipped
with an earthing conductor
plug.
• The plug must be plugged
into an appropriate outlet
that is installed and earthed
in accordance with all local
codes and ordinances.
• Improper connection of
the equipment-earthing
conductor can result in the
risk of an electric shock.
• Check with a qualied
electrician or service
representative if you are in
doubt whether the appliance
is properly grounded.
• Do not modify the plug
provided with the appliance
if it does not t the outlet.
• Have a proper outlet installed
by a qualied electrician.
• The appliance needs to be
connected to the main water
valve using new hose sets.
Old sets should not be reused.
• To save energy, in stand by
mode, the appliance will
switch of automatically after
15 minutes without any user
interaction.
• The maximum number of
place settings to be washed is
12.
• The maximum permissible
inlet water pressure is 1MPa.