70
disassembled, violent vibrations, noise and problems will
appear.
Use the supplied wrench to loosen the four bolts (see chart
2).
Slightly twist the bolt rubber and then pull it out. Keep the
bolts and wrench (see chart 3). The bolts should be
reassembled when the washing machine is transported
again.
Use the enclosed stopples to seal the screw holes (see chart
4).
Requires for positions
Horizontal Adjustment:
The angle of inclination must
be less than 1 degree.
Power outlet:
The distance between either
side of the washing machine
To Next Page
Loading...