73
rubber seal into the threaded fittings on each hose to prevent
leaking.
2. Connect the water supply hoses to the water faucets tightly by
hand and then tighten another 2/3 turn with pliers. Connect the
blue hose to water faucet.
WARNING: Do not overtighten. Damage to the coupling can
result.
3. After connecting inlet hose to water faucets, tum on the water
faucets to flush out foreign substances (dirt, sand or sawdust)
in the water lines. Let water drain into a bucket, and check the
water temperature.
4. Connect the hoses to the water inlet tightly by hand and the
tighten another 2/3 turn with pliers.
To Next Page
Loading...