Via Command Center
Provisioning a new hardware appliance via Command Center is a convenient way to deploy and configure NG Firewall. To set up and
manage your new appliance from Command Center follow these steps:
1. Navigate your web browser to https://untangle.com/cmd.
2. Log in with your Untangle Command Center account, or click Create Account to set up an account.
3. Navigate to the Appliances screen and click Add.
4. Enter the Untangle serial number located on the bottom of your appliance.
5. Click Add to confirm the new appliance.
6. After the appliance successfully adds to your account, you can select it from the list of appliances.
7. Click Remote Access to connect to the administration of your new appliance.
8. Continue to the setup wizard.
Via network connection
Alternatively, you can connect to your NG Firewall management interface from the local area network. This is useful for example if your NG
Firewall appliance cannot reach the Internet and you require local administration to configure the TCP/IP settings. To access the
administration from a local network follow these steps:
1. Connect your management system to the network attached to LAN port 2 of the appliance.
2. Check the network status of your management system and confirm that you receive an IPv4 address in the subnet of
192.168.2.0/24 (e.g. 192.168.2.100).
3. In a browser, navigate to https://192.168.2.1.
4. Accept the SSL certificate notice in your browser and continue to the setup wizard.
Via direct connection
If neither of the previous options is available, you can connect to your appliance directly by attaching a display to the VGA port on the front
panel, and a keyboard and mouse to the USB ports. At the menu on the bottom of the screen, click Launch Client to open the
administration in a browser and continue to the setup wizard.
Configure the setup wizard
When you connect to the administration for the first time, the setup wizard prompts you to configure the essential parameters to get your
appliance up and running.
Get Started
NG Firewall packages premium features as apps. During your first login NG Firewall prompts you to install the recommended apps. If you do not
have a license, some of the recommended apps run as a 14 day trial. The trial converts to a subscription once you apply a valid license. You can
learn more about NG Firewall apps at https://www.untangle.com/untangle-ng-firewall/applications/.
Warranty
This appliance is covered by a one or three year warranty based on the option chosen at the time of purchase. For a description of the warranty
policy visit http://www.untangle.com/refund-return-policy.
Support & Documentation
For technical support availability, contact information, and troubleshooting tips visit http://support.untangle.com. Help resources are
available in the online help system at http://wiki.untangle.com.
To Previous Page
Loading...
General