- 4 -
BEFORE START
1. Choose a flat and open area.
2. Wear safety protective devices.
3. Check the brakes for proper function.
4. Check the frame, fork, and handle bars for any cracks or broken connections.
5. Inspect tires for excess wear.
6. Check all parts such as nuts, bolts, cables, fasteners, etc. to ensure they are secure and assembled
correctly. If the unit is damaged do not ride.
Starting the Scooter
1. Press to turn on the power.
2. To ensure safety, put one foot on the pedal first and the other foot on the ground and kick it
backward to make the scooter slide forward. Then press the throttle switch slowly to accelerate.
3. Keep riding at a constant speed for 8 seconds, the throttle switch can be loosen and the E-scooter
will enter into cruise control status. Braking or accelerating will stop cruise control status.
Stopping the Scooter
1. Release the throttle in your right hand.
2. Pull hand brake slightly in your left hand. Brake will cut off motor power immediately and drum
brake on rear wheel will decelerate the scooter. After decelerating, put one foot on the ground. Do
not brake heavily. Road conditions should be considered.
To Next Page
Loading...