Urbanears Alby User Manual

www.urbanears.com
© Zound Industries International AB. All rights reserved. The wordmark,
logotype, headphone and packaging are intellectual properties of
Zound Industries International AB.
Zound Industries International AB, Centralplan 15, 111 20 Stockholm,
Sweden. Designed in Stockholm. Produced in China.
3
1
2
5
4
6

Urbanears Alby Specifications

General

Headset type	Binaural
Product type	Headset
Product color	Violet
Wearing style	In-ear
Recommended usage	Calls/Music
International Protection (IP) code	IPX4
Bluetooth	Yes
3.5 mm connector	No
Bluetooth version	5.0
Connectivity technology	Wireless
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Microphone type	Built-in
Number of microphones	2
Cables included	USB Type-C

Summary

First Time Setup

Initial Earbud Preparation

Open the charging case, remove earbuds, and attach protective plastic strips before initial use.

Connecting to Device

Insert earbuds into ears and select 'Urbanears Alby' from your device's Bluetooth menu.

Touch Controls

Playback and Call Management

Double tap any earbud to play/pause music or answer/hang up calls.

Track Navigation

Triple tap the left earbud for the previous song or the right earbud for the next song.

Voice Assistant Activation

Press and hold any earbud for 2 seconds to activate the voice assistant.

Charging Case Operation

Recharging Earbuds

Place earbuds in the case to recharge; a full case recharges earbuds up to 4 times.

Battery Level Indicator

The LED indicator shows case battery level: green (full) to red (low).

Charging the Case

Connect the case to a USB power source using the included USB-C cable.

Product Overview

Earbud Components

Details on touch control surface, LED indicator, microphone, and removable ear tips.

Charging Case Features

Identification of the case battery LED indicator and USB-C charging port.