6
Different parts
Editing
Before using your bike, there are a few simple assembly steps. Please follow these steps to assemble your bike.
STEP 1: UNPACKING
Remove all items from the carton and check that none of them are damaged. Remove all foam protection. Be careful
not to scratch or damage the product when cutting the clamps.
STEP 2: MOUNTING THE HANDLEBARS
Unscrew the 4 screws where the handlebars are to be inserted. (1)
Insert the handlebars in this position, use the marker to centre your handlebars and install them as best as possible.
(2)
To Next Page
Loading...
