6
Folding steps
Unfolding steps
Open the lock on the main bar of the
scooter
While pressing the red button, press down
on the handlebar to retract it, then press
the lock to block the handlebars
To fold the handlebars, press the two knobs (1),
then pull the two handles (2) outwards.
Push the handlebars slightly forward then press
the button down to fold your scooter.
Press the handlebar downwards to release
it from the rear brake.
Raise the handlebars to the stop to hold the right handlebar
Raise both handles to the stop.
Adjust the handlebars size by loosening
the latch.
Raise the handlebar while pressing the red
button.
To Next Page
Loading...
