To Next PageTo Next Page
Need help?Do you have a question about the urmet domus 1068 and is the answer not in the manual?
General| Brand | urmet domus |
|---|---|
| Model | 1068 |
| Category | Security System |
| Language | English |
Details the main control panel, its components, and LED indicators.
Describes the LCD keypad, its keys, and their functions.
Details the touch screen keypad, its hardware components, and display icons.
Describes the electronic key reader, its LEDs, and keyhole.
Describes the proximity key reader, its LEDs, and transponder.
Explains how to customize keypad display settings like LCD info and synoptic.
Explains how to set the system date, time, and daylight saving time.
Outlines methods for setting the alarm system, including EN50131 compliant options.
Outlines methods for unsetting the alarm system.
Describes how to view system status, open inputs, and alarm/tamper memory.
Explains how to delay an automatically programmed system setting.
Lists conditions that automatically prevent system setting.
Lists conditions that can be overridden or bypassed.
Provides an example of overriding a system setting prevention.
Describes signalling events found in the system log.
Explains the different system access codes (Master, User, Installer, Tech. Manager).
Explains how to access and navigate system menus.
Explains how to input alphanumeric characters for names and descriptions.
Explains how the Master user enables/disables functions, users, and keys.
Explains the System Log for 1068/005A and 1068/010A control panels.
Steps to assign a user to the system or specific zones.
Steps to assign a descriptive name to a user.
Details methods for reporting alarms and events (vocal, SMS, IDP, PUSH).
Explains how to configure phone numbers and IP addresses for notifications.
Explains how to configure descriptive text for SMS notifications.
Details how to control outputs using SMS messages.
Details how to activate outputs using free calls.
Explains remote control via voice menu.
Provides a list of DTMF commands for vocal control.
Steps to test the functionality of system inputs.
Steps to test the functionality of system outputs.
Steps to check the condition of the control panel battery.
Steps to test outgoing calls or SMS messages.
Steps to test PUSH notification sending.
Steps to test the GSM/GPRS field signal level.
Steps to test the IP interface connectivity.
Steps to test the supplementary power supply battery.
Section to record installation date, name, address, and phone.
Table to document zone IDs, descriptions, and notes.
Table to list programmed phone numbers with ID, name, and number.
