Page 11
4. Average Hold: It is used for weighing animals, the indicator will display the average weight
sampled from 3 seconds
• Add livestock to scale and press HOLD
• Indicator screen will show “LOC” for 3 seconds, then display the average weight from
those 3 seconds
• Press HOLD again to exit holding mode
Print
• If the indicator is connected to a printer and the weight on the scale is stable press the
PRINT key to print the current weight
• In accumulation mode hold the PRINT key for one second when the last 4 digits of the
total weight are shown to print the total weight
Note: In Tare mode the printer can not print if negative weight is shown
To Next Page
Loading...
