10
F 2 Menu
Setting the Choosing a pad to calibrate, zero calibration, loading calibration, and saving
Step Parameter Display Settings/Options
Enter F2 Menu
F 2
6 Pad Choice
SCALE 1
Choose a pad/scale to calibrate
Options: 1/2/3/4
7 Zero Calibration
CAL--0
0 = do not calibrate
1 = calibrate
Note: when 1 is selected the indicator will count down
from 9-0 and move on to the next setting
8 Calibration
SPAN-0
When ready for calibration, setting the span tells the
indicator the weight you will be calibrating the scale with
0 = do not set the span
1 = set the span
Use the arrow keys to set your calibration weight and
when done load your calibration weight to the scale
Once stable press to calibrate
T
he indicator will count down from 9-0 and move on to
the Saving parameter (Select 1 and press print to save
your calibration settings)
9 Save
SAVE-0
0 = do not save calibration
1 = save calibration
F 3 Menu
Step Parameter Display Settings/Options
Enter F3 Menu
F 3
10 Axle Number
ALE-02
Set the number of axles (for use with accumulation
mode)
11 Cargo Number
SN--00
Set the cargo number
12 Printing Format
PF - 1
0 = No printing
1 = Normal printing format
2 = Accumulative printing format
* See page 13 for examples
13 Printing Method
PM - 1
0 = Manual
1 = Automatic
*Manual is recommended for the most precise results
14 Printing Coupon
PC - 1
Printing coupon numbers setting
Options: 1/2/3
15 Baud Rate
Baud-1
Options: 1/2/3/4/5/6/7/8
0 = 600 1 = 1200 2 = 2400
3 = 4800 4 = 9600 5 = 19200
6 = 38400 7 = 57600 8 = 115200
16 Communication
Settings
CP - 1
0 = Communication off
1 = Communication format 1 for PC
2 = Communication format 2 for second display
(YAO HUA MODEL)
3 = Communication format 3 for second display
(TOLEDO MODEL)
To Next Page
Loading...
