3-17
Preparation before Use > Loading Paper
2 Grasp the paper width adjusting tab and move the paper width guides to fit the paper.
3
Load paper.
1 Align the paper flush against the right side of the cassette.
• If paper is loaded without adjusting the paper length guide and paper width guide,
the paper may skew or become jammed.
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the
multi-purpose tray. (Refer to Before Loading Paper on page 3-15
.)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled
or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
below).
To Next Page
Loading...
