5-8
Operation on the Machine > Program
Editing and Deleting Programs
You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
1
Display the screen.
1 Press [Program] on the Home screen.
2 Press [Edit].
2
Edit the program.
To edit a program
1 Press the key(s) corresponding to the program number (01 to 50) to change.
2 Press [Edit], and refer to Registering Programs on page 5-6
to change the program number
and program name.
3 Press [Save].
4 Press [Yes] in the confirmation screen.
To delete
1 Press the key(s) corresponding to the program number (01 to 50) to delete.
2 Press [Delete].
3 Press [Yes] in the confirmation screen.
To modify the settings of a registered program, recall the program you want to change, change its settings, then refer
to Registering Programs on page 5-6
to re-register the changed program.
To Next Page
Loading...
