5-37
Operation on the Machine > Sending
WSD scan
1
Press [Send] on the Home screen.
2
Place the originals.
3
Display the screen.
Press [WSD Scan/DSM Scan].
If DSM Scan on page 8-45
is set to [Off] in the network settings, press [WSD Scan] and go to
step 4.
4
Scan the originals.
Procedure using this machine
1 Select [From Operation Panel] and press [Next].
2 Select the destination computer and press [OK].
Press [Reload] to reload the computer list.
You can view information on the selected computer by pressing [Detail].
Loading Originals (page 5-2)
To Next Page
Loading...
