Please follow the installation step
Please check the equipment and accessory before installation and contract Product dealer
if lose .
SFP optical module 1 PC
User manual 1 PC
1) Turn off equipment power before installation, installation with power maybe damage
equipment；
2) Put SFP optical module insert SFP slot；
3) Check out installation and damage of equipment , confirm all the connection, connect
power line to provide system power.
4) Confirm optical fiber communication is normal.
Installation step
SFP optical module is a standard SFP optical module. the product use two multi-mode
fibers,the rate can reach 1.25Gbps, transmission distance can reach 550m. the equipment
can adapt optical fiber transceiver with SFP slot, optical Ethernet switch equipment, also
can be used in Ethernet, telecom, optical fiber communication.
1.25G duplex-LC multi-mode 550m SFP optical module
1
Feature
Use SFP package type, LC connector, support SFF8472 standard；
Use 850nm FP laser and PIN photo detector;
Support hot plug；
Multimode fiber can achieve 550m data transmission distance;
Meet (LVPECL) standard data input and output port;
Low EMI for environment ,high eletrostatic protection;
Meet IEC-60825 laser safety standard.
Board diagram
SFP Socket
Optical Fiber Port
SFP optical module
To Next Page
Need help?
General