UTICA BOILERS TCI-150RA Series User Manual

Note: Single setting wrenches do not have a scale and must be set on a torque tester.
Instruction Manual
45-8448
CH & TCI Series
Click Type Torque Sensing Wrenches
Utica
®
in.-lb. Nm in.-lb. Nm
TCI-150RA * 30-150 3.4-17.0 1.0 0 . 1 1 1/4"
TCI-150RA-3/8 * 30-150 3.4-17.0 1.0 0 . 1 1 3/8"
TCI-250R * 50-250 5.7-28.3 1.0 0 . 1 1 3/8"
TCI-750R 150-750 ------ 5.0 ------ 3/8"
TCI-750R-1/2 150-750 ------ 5.0 ------ 1/2"
* Note: Dual Scale Model
ft.-lb. Nm ft.-lb. Nm
TCI-75FRN * 15-75 20.3-102 0.5 0.7 3/8"
* Note: Dual Scale Model
in.-lb. Nm in.-lb. Nm
CH-150 * 30-150 3.4-17.0 1.0 0 . 1 1 ---
* Note: Dual Scale Model
ft.-lb. Nm ft.-lb. Nm
CH-75F *
15-75 20.3-102 0.5 0.7 ---
CH-150F * 30-150 40.7-203 1.0 1.4 ---
* Note: Dual Scale Model
in.-lb. Nm ft.-lb. cm-kg
CHA-6 10-50 1.2-6 0.9-4.5 12-60 ---
CHA-11 20-100 2.2-11 1.6-8 22-110 ---
CHA-23 40-200 4.6-23 3.4-17 46-230 ---
CHB-55 100-500 11-55 8-40 112-560 ---
CHB-85 150-750 17-85 12.5-62.5 172-860 ---
CHB-110 200-1000 22-110 16-80 224-1120 ---
CHB-170 300-1500 34-170 25-125 346-1730 ---
CHB-225 400-2000 45-225 33-165 460-2300 ---
Torque Range
Graduations
Drive Size
Single Setting (Preset) Wrench
Model No.
Drive Size
Torque Range
Model No.
Model No.
Torque Range
Graduations
Drive Size
Micrometer Adjustable Wrench (in.-lb. Graduations)
Model No.
Torque Range
Graduations
Drive Size
Micrometer Adjustable Wrench (ft.-lb. Graduations)
Model No.
Ratchet Head (in.-lb. Graduations)
Drive Size
Torque Range
Graduations
Ratchet Head (ft.-lb. Graduations)
Ratchet Head
Micrometer Adjustable
Single Setting

UTICA BOILERS TCI-150RA Series Specifications

General

Brand	UTICA BOILERS
Model	TCI-150RA Series
Category	Power Tool
Language	English